Cisco Profile Series Aan de slag handleiding - Pagina 17

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Profile Series. Cisco Profile Series 42 pagina's. Jbod on the 12g sas modular raid controller
Ook voor Cisco Profile Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (7 pagina's), Aan de slag handleiding (35 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (44 pagina's), Configuratiehandleiding (13 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Handleiding installeren (16 pagina's), Aan de slag handleiding (32 pagina's), Handmatig (16 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence Video Systems

Contents

Configuration using the remote

control and on-screen menu*

Waking up the system

if there is no menu on screen, press

control to show the menu.

if the system does not show a menu on screen:

•

Make sure the monitor is connected and has been switched

on.

•

Make sure the remote control has batteries installed.

•

Make sure the system is switched on.

if the system has just been switched on, wait a few minutes

to allow the system to start up.

if there is still no menu on screen, make sure the

m o n i to r c a b l e i s c o n n e c te d to t h e b a s i c v i d e o

output. connector. if in doubt, see the installation guide for

your product.

* this section does not apply for eX and MX series.

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

Home

(

)

on the remote

Confirguration

Configuration

Remote control and

on-screen menu

Getting Started Guide

Appendices

Contacts