Cisco SX80 Handmatig - Pagina 25

Blader online of download pdf Handmatig voor {categorie_naam} Cisco SX80. Cisco SX80 45 pagina's. With touchpad 10
Ook voor Cisco SX80: Installatiehandleiding (7 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Gebruikershandleiding (19 pagina's), Installatiehandleiding (24 pagina's), Installatiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (7 pagina's), Referentiehandleiding (8 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco SX80 Handmatig

Button with symbol

Table of contents
Introduction
Example of use: Controls for a media player, or other devices that
Create a user interface
can start, stop, pause.
API for in-room control
Events
Pressed
Widgets
Widgets
Released
Command reference
Clicked
Troubleshooting
Tips and tricks
Examples
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
Commands
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
Use the
All rights reserved.
interface. A value of
"inactive"
    
inactive
Triggered when the button is pressed
Value: N/A
Triggered when the button is released
Value: N/A
Triggered when the button is released
Value: N/A
command to highlight or not the button in the user
SetValue
will highlight the button, and a value of
"active"
will release it.
There are buttons with different symbols under the Icons tab in the
library. Such a button has similar behavior as a button with custom
text.
    
A button has two states: active and inactive. You do not have to set
the button in active state when someone taps it; the button can be
active
used to just send a signal without changing its visual state.
Example:
*e UserInterface Extensions Event Pressed Signal: "symbol"
** end
*e UserInterface Extensions Event Released Signal: "symbol"
** end
*e UserInterface Extensions Event Clicked Signal: "symbol"
** end
.
.
.
<Event>
<UserInterface item="1">
</UserInterface>
</Event>
Example:
active state)
xCommand UserInterface Extensions Widget SetValue WidgetId: "symbol"
25
Press and release the button with WidgetId = "symbol".
Terminal mode
XML mode
<Extensions item="1">
<Widget item="1">
<Action item="1">
<WidgetId item="1">symbol</WidgetId>
<Value item="1"></Value>
<Type item="1">clicked</Type>
</Action>
</Widget>
</Extensions>
Highlight the button with WidgetId = "symbol" (set it in
Value: "active"