Cisco SX80 Aan de slag handleiding - Pagina 12

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco SX80. Cisco SX80 46 pagina's. With touchpad 10
Ook voor Cisco SX80: Installatiehandleiding (7 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Gebruikershandleiding (19 pagina's), Installatiehandleiding (24 pagina's), Installatiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (7 pagina's), Referentiehandleiding (8 pagina's)

Cisco TelePresence Video Systems

Contents

Configuration using the Touch controller

Waking up the system

If no menu is displayed on the Touch controller, tap the display

to wake up the system.

If the system does not wake up:

•

Make sure the Touch controller is connected to the main unit.

•

Make sure the main unit is connected to power and

switched on.

If the system has just been switched on, wait a few minutes to

allow the system to start up.

If in doubt, read the installation guide for your product.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Configuration

Touch controller

Getting Started Guide

Appendices

Contacts