Cisco TelePresence DX70 Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco TelePresence DX70. Cisco TelePresence DX70 33 pagina's. Nhs networked use
Ook voor Cisco TelePresence DX70: Installatiehandleiding (6 pagina's), Gebruikershandleiding (48 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (48 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (14 pagina's), Handmatig (43 pagina's), Instellen voor gebruik in zorginstellingen (3 pagina's), Instellen (2 pagina's)

Camera

Move the Selfview PiP

Tap and hold the selfview image.

Drag the image to a new position,

shown here is the upper left corner.

You will now see the alternate positions

available for the selfview image. Keep holding

the image

Release the image by lifting your finger from

the screen. The selfview image has now

assumed its new position.

Why Move the Selfview?

Selfview shows what others see

from your video system. You will

normally use it to confirm that they

see what you want them to see.

The selfview appears as a PiP

(Picture-in-Picture).

From time to time you may want to

have the selfview activated during

the meeting. This could, for example,

be to ensure that you remain seen

on the screen.

It may happen that the current

position of the selfview blocks

important parts of the image on your

screen. You may therefore want to

move it.

D1510413 User Guide

Cisco TelePresence DX70, DX80

Produced: April 2016 for CE8.2