Cisco TelePresence DX80 Gebruikershandleiding - Pagina 36

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco TelePresence DX80. Cisco TelePresence DX80 40 pagina's. Touchscreen mbtelehealth a shared health service
Ook voor Cisco TelePresence DX80: Installatiehandleiding (6 pagina's), Gebruikershandleiding (48 pagina's), Gebruikershandleiding (48 pagina's), Gebruikershandleiding (33 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (40 pagina's), Handmatig (43 pagina's), Instellen (2 pagina's), Snelle referentiehandleiding (3 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (8 pagina's)

Camera Control

Move the Selfview PiP

Tap and hold the selfview image.

Drag the image to a new position, shown here is the

upper left corner.

D1510418 User Guide

Cisco TelePresence DX70, DX80

Produced: June 2017 for CE9.0

You will now see the alternate positions

available for the selfview image. Keep holding

the image.

Release the image by lifting your finger from the

screen. The selfview image has now assumed its

new position.

Selfview shows what others see from

your video system. You will normally

use it to confirm that they see what

you want them to see.

The selfview appears as a PiP

(Picture-in-Picture).

From time to time you may want to

have the selfview activated during the

meeting. This could, for example, be

to ensure that you remain seen on the

screen.

It may happen that the current position

of the selfview blocks important parts

of the image on your screen. You may

therefore want to move it.