Cisco TelePresence IX5000 Handmatig - Pagina 40

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence IX5000. Cisco TelePresence IX5000 44 pagina's. Field-replaceable units and countryand region-specific power connectors
Ook voor Cisco TelePresence IX5000: Gebruikershandleiding Snel aan de slag (15 pagina's), Gebruikershandleiding (26 pagina's), Installatiehandleiding (36 pagina's), Eerste installatie (40 pagina's)

Pagina afdrukken

Replacing a Microphone (Mic) Bar—Part Number CTS-5K-MIC=

Figure 6

Removing the Brackets from the Encoder/Decoder Codec

Step 6

Attach the brackets to the new codec.

Step 7

Insert the codec into the endpoint structure.

Step 8

Reconnect the cables.

Step 9

Disconnect the power to the switch and the table, and disconnect the Touch 10 devices. For more

information, refer to the

First-Time Setup

Step 10

Power on the PDUs.

Step 11

Attach the bottom fascia.

Step 12

Perform first-time setup of the system. For more information. refer to the

Setup

Replacing a Microphone (Mic) Bar—Part Number

CTS-5K-MIC=

Required Tools

#2 Phillips screwdriver

IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors

"Preventing Touch 10 Configuration Issues"

document.

section of the

IX5000 and IX5200

IX5000 and IX5200 First-Time