Cisco Telepresence MX200 Handleiding installeren - Pagina 2

Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco Telepresence MX200. Cisco Telepresence MX200 6 pagina's. Table stand
Ook voor Cisco Telepresence MX200: Gebruikershandleiding (44 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (35 pagina's), Snelle referentiehandleiding (2 pagina's), Snelstarthandleiding (12 pagina's), Snelle referentiehandleiding (2 pagina's), Handleiding voor probleemoplossing (37 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco Telepresence MX200 Handleiding installeren
Installing Cisco TelePresence MX200 - Table Stand
1b
Unpacking the MX200 video system
The MX200 box
The MX200 box contains the LCD video unit, the Touch
controller and accessories.
i
Cut the straps and lift off the outer covering.
ii
Remove the upper foam protection.
Note:
Leave the LCD video unit in the bottom tray
for now.
iii
Lift out the rectangular box from behind the LCD
video unit.
This box contains two smaller boxes: One with the
Touch controller and one accessories box with the
microphone, cables, screws and tool.
iv
Unpack the Touch controller, and open the
accessories box.
78-20007-03 MX200 Table Stand Installation Sheet | 2012 JANUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
Outer
covering
LCD video
unit
Bottom tray
Touch controller
with cable
Accessories box:
•
Microphone
•
Power cable
•
Presentation cable (VGA to
DVI-I; stereo audio)
•
Ethernet cable
•
Four screws for fastening
the LCD video unit to the
table stand
•
Hexagonal screwdriver
•
Two pairs of gloves