Cisco TelePresence MX700 Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 12 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken

Cisco TelePresence MX700 Snelstarthandleiding

Camera

Add Camera Position Preset

Your video system lets you create predefined zoom and camera

pointing directions.

›

Tap Camera and then Selfview to activate it.

›

Adjust Tilt, Pan and Zoom as required.

›

Tap Add New and key in a descriptive name.

›

Tap Save to put the changes in effect, or tap Cancel to leave

menu with no change.

Edit Existing Camera Preset Position

›

Tap Camera and then Selfview.

›

Adjust Tilt, Pan and Zoom as required.

›

Tap the arrowhead of the preset that requires editing.

›

Tap Update to current position to make the changes. To delete

the existing preset tap Remove.

Control Own Camera

Using your camera presets

›

While in a call or outside a call, tap Camera and select the

preset to use.

Quickstart Guide | Cisco Telepresence MX Series

Camera

Adjusting your camera's pan, tilt and zoom

›

While in a call or outside a call, tap Camera.

›

Tap Selfview and then adjust the Pan, Tilt and Zoom.

Manage Selfview

Outside a call:

›

Tap Camera and then Selfview. You can now adjust the

settings as per the control instructions.

In a call:

›

Tap the Selfview avatar. This will allow you to switch it off,

maximize or minimize to view or select Camera to gain access

to the camera controls.

To move the Selfview Picture-inPicture (PiP):

›

Tap Selfview in the top right corner of the screen.

›

Press and hold your finger in the Selfview area. It will turn blue

which will allow you to drag the view to a new location (these

will be indicated on the screen).

›

Once you have found the location you want it in, lift your finger

from the screen. This will set the new location.

›

Control the Camera of the Other Participant.

›

During a call tap the avatar of the other participant, or the

participant you wish to control.

Quickstart Guide | Cisco Telepresence MX Series