Cisco TelePresence MX700 Installatiehandleiding - Pagina 23

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 28 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence MX700 Installatiehandleiding
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
18

Connect external cables

I, J
Make sure the camera can move
freely before connecting power.
Always use the power
cables provided.
The plug-socket
combination must be
accessible at all times,
because it serves as
the main disconnecting
device.
Power (100-240 VAC, 50/60 Hz),
extension cord and country specific cable
78-100218-01 A0 | 2014 APRIL | © 2014 Cisco Systems, Inc. All rights reserved.
(page 1 of 2)
Microphones
(max 8)
Network
1
Codec connector panel
Video input
e.g. computer (max 2)
2
CAT 5e, shielded Ethernet cable, 5 m.
1
Two presentation cables are provided: HDMI ↔ HDMI;
2
and DVI/Euroblock ↔ VGA/mini jack.
Route the cables down,
and put them behind the
hooks in the floor stand.
Page 23