Cisco TelePresence MX700 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 29 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence MX700 Installatiehandleiding
Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
5
Read this before you mount the monitors
The monitors are heavy
We recommend three people
working together to mount the
monitors. Two people should lift
the monitor using the handles as
described here. The other person
must help stabilizing the monitor
and check that the monitor enters
the slots properly.
The screws with wing nut, which
you can see from the sides of the
monitor, must enter the center slot
on each side of the lower frame.
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Use lifting handles
To avoid trapping your fingers, use the
lifting handles at the bottom of the monitor.
Applies to systems that are secured to
the wall: To assure that the camera can
move freely, fasten two bump-ons on
the rear of the top profile, close to the
camera.
Page 10