Cisco TelePresence MX700 Handmatig - Pagina 43

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 45 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Control of blinds

Table of contents

You can either use a spinner, or up and down arrows from the Icons

tab in the widget library.

Introduction

Create a user interface

API for in-room control

Widgets

Command reference

Troubleshooting

Tips and tricks

Consider the following strategy:

• Tilt the slides as response to a short press on a direction arrow. If

Examples

• As response to a long press on a direction arrow, start moving

• Short press any button in order to stop the movement after a long

In-Room Control on Touch 10

for Cisco TelePresence

MX200 G2, MX300 G2,

MX700, MX800,

SX10, SX20, SX80

Collaboration Endpoint

software version CE8.2

D15358.02 - JULY 2016

www.cisco.com

tilted all the way, move the blinds up or down incrementally.

the blinds in that direction. They do not stop until all the way up or

down.

press. Then no separate stop button is necessary.

Use a button only to send a signal

A button can be used just to send a signal, without changing the

button's state or visual appearance.

As an example, use the All lights on button to switch on all lights. Do

not change the button's color from gray to blue, but update the other

light controls to reflect the true status of the room.

A button that does not change color

(from gray to blue) when used