Cisco TelePresence MX700 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 45 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (29 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence MX700 Handmatig
In-room controls
Table of contents
Introduction
Introduction
Create a user interface
API for in-room control
Widgets
Example of Global and Homescreen in-room control panels on Touch
10. Any In-Call panel icons existing will be visible during calls only.
Command reference
You can customize the Touch 10 user interface to allow control of
peripherals in a meeting room, for example playback of a sound or
Troubleshooting
movie source, lights and blinds.
You can also add content sensitive controls appearing only when in a
call and/or only outside calls.
Tips and tricks
This means that altogether you have three sets of panels at your
disposal:
•
Examples
•
In-Room Control on Touch 10
•
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
Global
panel has its entry icon in the status bar at the top of the
Touch 10 display. Once established, this entry icon is visible at all
times.
Homescreen
panel has its entry icon located to the right of the
buttons appearing along the bottom of the Touch 10 display. This
entry icon is visible outside calls only.
In-Call
panel has its entry icon located to the right of the buttons
appearing along the bottom of the Touch 10 display. This entry
icon is visible when in a call only.
You need a Cisco video system with a Touch 10 user interface, and a
third-party control system, for example Crestron, AMX.
Global entry icon
example
The video system's API, referred to as the xAPI, is the link between
the video system and the control system. Use the events and
commands exposed by the xAPI when you program the control
Global control
system.
panel example
The simple drag-and-drop in-room control editor offers a library of
user interface elements, referred to as widgets. You can use these
Homescreen
widgets to create your own in-room control panel for the Touch 10
entry icon
user interface.
example
Together, all of this provides a powerful combination of the control
system's functionality and the user-friendly Touch 10 user interface.
Touch 10
5
Blinds
xAPI
Video system
Control system
In-room
control
editor
Other...
In-room control schematics
Climate
Lights