Cisco Telepresence MX800 Vervangingshandleiding - Pagina 36

Blader online of download pdf Vervangingshandleiding voor {categorie_naam} Cisco Telepresence MX800. Cisco Telepresence MX800 46 pagina's. Wall-mounted mx800 single
Ook voor Cisco Telepresence MX800: Snelstarthandleiding (12 pagina's), Installatiehandleiding (16 pagina's), Vervangingshandleiding (47 pagina's), Installatiehandleiding (30 pagina's), Onderdelen (24 pagina's), Installatiehandleiding (16 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence MX800 Single

Contents

Replace the monitor (mounted on a stand)

Step 6: Lift off the monitor

Before moving the monitor

Plan ahead where to put down the

monitor. Ideally, place it in the original

shipping packaging.

The monitor is heavy

We recommend four people

working together to replace the

90 kg / 200 lb

monitor. Two people should lift

the monitor using the handles as

described below; the other people

must help stabilizing the monitor.

Use lifting handles

To avoid trapping your fingers, use the lifting

handles at the bottom of the monitor.

D15298.01 MX800 Single Replacement Guide, MARCH 2015.

Introduction

Grilles and covers

(page 4 of 5)

Speakers and cameras

Replacement Guide

Codec and monitor

Appendix

Rear view

Loosen the wing nuts on

both sides.

They are accessed from

the sides of the monitor.

Lift up the monitor and

place it in the original

shipping packaging.