Cisco Telepresence MX800 Vervangingshandleiding - Pagina 31

Blader online of download pdf Vervangingshandleiding voor {categorie_naam} Cisco Telepresence MX800. Cisco Telepresence MX800 47 pagina's. Wall-mounted mx800 single
Ook voor Cisco Telepresence MX800: Snelstarthandleiding (12 pagina's), Installatiehandleiding (16 pagina's), Vervangingshandleiding (46 pagina's), Installatiehandleiding (30 pagina's), Onderdelen (24 pagina's), Installatiehandleiding (16 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence MX800 Dual

Contents

Replace monitor (mounted on a stand)

Step 4: Remove all cables

All cables that were shipped with the system

remain in your property and should not be

returned to the supplier.

You will not receive new cables with the

replacement part.

Only remove cables for the monitor that you

are replacing.

For reconnecting the cables, refer to cabling details

in the Cable schema and Spare part list on our web

site. Go to

http://www.cisco.com/go/mx-docs

select Maintain and Operate Guides.

D15327.01 MX800 Dual Replacement Guide, MAY 2015.

Introduction

Grilles and covers

(page 2 of 7)

From codec connector panel

and

Power

Speakers and cameras

Replacement Guide

Codec and monitors

Appendix

From codec, camera,

loudspeakers and right monitor

From codec, loudspeakers

and left monitor

From PoE injector