Cisco TelePresence Profile 52 Dual Aan de slag handleiding - Pagina 36

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco TelePresence Profile 52 Dual. Cisco TelePresence Profile 52 Dual 42 pagina's. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Ook voor Cisco TelePresence Profile 52 Dual: Gebruikershandleiding (44 pagina's)

Pagina afdrukken

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

Call key

Press the Call key to place

a call, and to accept an

incoming call.

Use the Call button as a

shortcut to Recent Calls when

the Call menu is not visible.

Clear

Press the Clear key to remove

characters in a text field.

Waking up the system

To wake up the system

just pick up the remote

control or press any key.

You may have to point the

remote control towards the

system/camera to make

sure it discovers you.

Home key

Press the

HOME

key to show

the Home menu on screen.

User interfaces

Configuration

End call / Standby

Press the End Call key to

reject an incoming call, to

end an ongoing call or—when

idle—to go into standby mode.

When navigating in the menu

the key is used to exit the

menu system.

Press and hold this key

to have the system enter

standby mode.

Rubber line sensors

When you pick up the remote

control and touch the rubber

line sensors along the sides

of the remote control, the

system wakes up..

Appendices

Alphanumeric keypad

The keypad behaves in a

similar way to the keypad

of a cellular phone.

0-9, a-z, period (.), @,

space, *

Press a key repeatedly

to toggle between the

options displayed on each

key.

IR sensor range (DIP switch setting)

The IR sensor has a short and long range. When video conference systems are placed close

to each other, you may find it convenient to use the short range to avoid interfering with the

other systems.

Open the battery cover and remove the batteries to set the DIP switch.

• Short range (1 m / 3 ft): Move the DIP switch down.

• Long range: Move the DIP switch up.

The DIP switch

abc/123 #

Press and hold the #

key to toggle between

lower and upper case

characters and numbers

(depending on context).