Cisco TelePresence SX10 Beknopte handleiding

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Cisco TelePresence SX10. Cisco TelePresence SX10 2 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX10: Installatiehandleiding (8 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Voorlopige gebruikershandleiding (9 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (46 pagina's), Beknopte handleiding (2 pagina's)

Pagina afdrukken
Cisco TelePresence SX10 Beknopte handleiding
Amcom Cisco SX10 Quick Guide
Remote Control and the Home Screen
Remote Control
Volume and Zoom control.
1.
Field selector / Cursor keys.
2.
OK / Enter key.
3.
Go back one step / Backspace.
4.
Microphone mute / Unmute.
5.
Place a call / Accept incoming call.
6.
Reject incoming call / End call /
7.
Cancel / Back to Home screen
(outside calls).
Keypad
8.
Home Screen
A.
Access Settings, Standby mode
and the Do No Disturb features.
Access the Camera Control menu.
B.
Place a Call.
C.
Share Content.
D.
Place a Call
Select Call from the home
1.
screen and press OK or press the
green Call button on the remote.
Enable Do Not Disturb
Using the remote, select the field
1.
in the upper left corner of the
Home screen and press OK.
1
2
3
4
5
6
7
1
2
3
8
.@
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
*
0
#
Use the Cursor keys to select the
2.
Search or Dial field, as outlined.
Press the corresponding keys on
3.
the remote to enter a number.
Tap the green Call button to place
4.
the call.
Select Available or Do Not Disturb.
2.
Press OK to save and exit
3.
the menu.
A
C
Operating Tips
Use the Cursor controls to move about the
screen and press OK / Enter to open the
selected menu field.
Use the Cancel key to exit a menu (and return to
the Home screen) undoing any changes.
Use the Back key to go just one step back.
Press the red End Call button or
5.
use the Cursor keys to select End.
Press OK to terminate the call.
6.
Operating Tips
Your system can be set to ignore
incoming calls, however, you may
still call others.
B
D