Argo Glamour Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo Glamour. Argo Glamour 13 pagina's.

During dehumidification, continuous drainage should be implemented (see the next chapter, "HOW TO ELIMINATE

CONDENSATE").

3. FAN ONLY MODE



Press the MODE button until the Fan icon displays.



In this mode, the fan speed can be set.



The temperature cannot be regulated.

V 12/16

HOW TO ELIMINATE CONDENSATE

Cooling

This appliance automatically vaporises condensate in the cooling mode.

Ensure that when the unit is operating in cooling mode, the rubber caps closing the

drainage holes on the rear of the appliance are properly positioned.

When the air conditioner operates in cooling mode, there is no need for continuous

condensate drainage; only in specific weather conditions with very high air humidity

levels may water deposit inside the unit. When the internal container is full, the display

visualises message "P1" and the appliance stops functioning.

To empty the container, switch the air conditioner off and unplug it. Remove the cap

form the rear drainage hole and direct it over a normal drain.

Ensure that the tube is not twisted or bent. The tube must slope downwards. Re-close

the drainage hole with the cap and resume use of the air conditioner.

Dehumidification

WARNING!

When using the air conditioner in dehumidification mode, it is advisable to always

arrange for continuous drainage, so as to maximise dehumidification efficiency.

Connect one end of the PVC pipe provided to the rear discharge hole and place the

other end above a drain.