Cisco TelePresence SX20 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence SX20. Cisco TelePresence SX20 8 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX20: Snelle set (8 pagina's), Aan de slag handleiding (41 pagina's), Aan de slag handleiding (42 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle set (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Handleiding voor probleemoplossing (37 pagina's), Handleiding voor naleving van regelgeving en veiligheidsinformatie (9 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (42 pagina's), Referentiehandleiding (8 pagina's), Aan de slag handleiding (46 pagina's)

Using TRC6 Remote Control

When you pick up the remote control, the system wakes up.

Use the [Cursor] controls to move about the screen and press [OK/Enter] to open

the selected menu field. Use the [Cancel] key to exit a menu (and return to the

Home screen) undoing any changes. Use the [Back] key to go just one step back.

Make sure the remote control has working batteries (2 x AAA batteries).

Volume control and

Increase/Decrease control

Field selector/

Cursor keys

Go back one step

Place call /

Accept incoming call

ghi

Keypad

pqrs

OK/Enter

Microphone

mute/unmute

Reject incoming call /

End call / Cancel /

Back to Home

abc

def

screen (outside calls)

jkl

mno

tuv

wxyz

Using Setup Assistant

When you start the system for the first time, the setup assistant starts automatically.

Navigate through the setup with either a remote control or from the touch touch

controller.

MEMO

This guide doesn t cover information on Cisco Spark registered systems. For more information

on Cisco Spark room systems, visit:

https://help.webex.com/community/cisco-cloud-collab-mgmt

Using Setup Assistant

Select [Get started].

Select [Other services].

If your system is automatically

provisioned, the IP and provi-

sioning settings are automati-

cally configured and the setup

assistant skips these steps. Skip

Cisco TelePresence SX20 Quick Set Easy Setup Guide