Cisco TelePresence SX20 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence SX20. Cisco TelePresence SX20 2 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX20: Snelle set (8 pagina's), Aan de slag handleiding (41 pagina's), Aan de slag handleiding (42 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle set (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Handleiding voor probleemoplossing (37 pagina's), Handleiding voor naleving van regelgeving en veiligheidsinformatie (9 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatieblad (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Aan de slag handleiding (42 pagina's), Referentiehandleiding (8 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence SX20 Installatiehandleiding
Installation Guide for Cisco TelePresence SX20 Quick Set
Connecting the cables
Connect all cables as illustrated.
Caution:
Make sure all units are switched off when connecting or
disconnecting devices.
If connecting an external loudspeaker, please take care to use an
1
active speaker (built-in amplifier). Use an ungrounded (floating)
speaker to avoid ground loop noise.
Connect one or two microphones to your codec.
2
We recommend Cisco Table Microphone 20 or
Cisco TelePresence Ceiling Microphone.
Connect the codec to LAN/Ethernet.
3
Connect your primary display to the blue colored HDMI socket.
4
With the dual display option, connect the second display to the
other HDMI output.
Connect your camera (option A or B, or a third-party camera) to
5
the codec.
Connect a PC (video and audio) to be able to share presentations
6
(locally, or with remote participants).
Always use the provided power supply:
7
y FSP FSP060-DIBAN2
Starting to use the system
If the codec is not starting automatically, press the power button
to switch it on. When the button lights steadily the system is
ready for configuration. This may take a few minutes.
Follow the instructions on screen:
y Cisco Webex: To find more information on how to get started, visit
https://collaborationhelp.cisco.com
and look for Getting Started
articles for room devices.
y Other services: For further information on set-up and
configuration, download the Getting Started Guide from
https://www.cisco.com/go/sx-docs
78-100554-03A0 | 2018 MAY | © 2018 Cisco Systems, Inc. All rights reserved.
1
2
7
3
4
HDMI
Mini-
HDMI
jack
(or VGA)
6
5
Camera option A:
PrecisionHD 1080p 12X
Camera option B:
Precision 40
Third-party camera
Camera control
Video
Ventilation
Do not block any ventilation openings;
minimum 8 cm / 3.15 in. free space.