Sony BVP-950P Series Bedieningshandleiding - Pagina 8
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sony BVP-950P Series. Sony BVP-950P Series 40 pagina's. Color video camera
Pagina afdrukken
Location and Function of Parts
1 FILTER LOCAL (filter local control) button
Press the CC or ND filter button while pressing this
button to enable switching of the CC and ND filters.
2 ND filter button
Selects the desired ND filter while pressing the
FILTER LOCAL button.
Filter No.
Filter
1
Clear
1
2
/
ND
4
1
3
/
ND
8
1
4
/
ND
16
1
5
/
ND
64
3 CC (color temperature conversion) filter button
Selects the desired CC filter suitable for the lighting
conditions while pressing the FILTER LOCAL button.
Filter No.
Filter
A
Cross filter
B
3200K (Clear)
C
4300K
D
6300K
E
8000K
4 WHITE (white balance memory select) switch
Selects the white balance adjustment method and
memory to store the adjusted value.
PRESET: White balance is automatically adjusted to
the preset value for the color temperature of 3200K.
A or B: Memory A or B is selected.
5 OUTPUT/AUTO KNEE (output signal select/
auto knee) switch
Selects an output signal supplied to a VTR, viewfinder
and video monitor (color bar signals or camera
picture). When a camera picture is selected, the auto
knee function can be activated.
BARS/OFF: Color-bar signals are output, and the
auto-knee circuit does not function.
CAM/OFF: A camera picture is output, but the auto-
knee circuit does not function.
CAM/ON: A camera picture is output, and the auto-
knee circuit functions.
6 (E)
6 GAIN switch
Selects the appropriate video gain according to the
illumination of the subject to be shot. The values for
positions L, M, and H are set with the Setup Menu on
the viewfinder screen.
For details, refer to the System Manual.
7 VTR switch
Selects the control signal for the VTR when the VTR
is connected to this unit using the optional CA-553/
553P Camera Adaptor. According to the setting of this
switch, the VTR starts recording as follows:
SAVE: Power-save position for recording. Recording
starts a few seconds after the VTR START button
is pressed. A newly recorded picture may not
smoothly be connected to the previously recorded
part.
STBY (standby): Recording starts immediately upon
pressing the VTR START button.
Note
The WHITE 4, OUTPUT/AUTO KNEE 5, GAIN 6,
and VTR 7 switches do not function when the camera
is connected to a Camera Control Unit (CCU).
8 ENTER/CANCEL switch
Functions when the DISPLAY switch is set to MENU
(Menu mode).
ENTER: Activates the selection made by the MIC 1
LEVEL control.
CANCEL: Cancels the selection made by the MIC 1
LEVEL control and restores the previously selected
menu item.
For menu operations, refer to the System Manual.
9 DISPLAY switch
Used for displaying the camera status such as switch
settings, items and results of automatic adjustments on
the viewfinder screen.
ON: Display function is activated.
OFF: Display function is not activated.
MENU: A screen for setting the displaying items and
functions appears. The MIC 1 LEVEL control on
the front panel functions as the menu item selector.
For menu operations, refer to the System Manual.