Cisco TelePresence SX20 Aan de slag handleiding - Pagina 13

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco TelePresence SX20. Cisco TelePresence SX20 42 pagina's. In-room control on touch 10
Ook voor Cisco TelePresence SX20: Snelle set (8 pagina's), Aan de slag handleiding (41 pagina's), Aan de slag handleiding (42 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle set (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (29 pagina's), Handleiding voor probleemoplossing (37 pagina's), Handleiding voor naleving van regelgeving en veiligheidsinformatie (9 pagina's), Installatiehandleiding (8 pagina's), Gebruikershandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (37 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Referentiehandleiding (8 pagina's), Aan de slag handleiding (46 pagina's)

Pagina afdrukken
Cisco TelePresence SX20 Aan de slag handleiding
Cisco TelePresence Video Systems
Contents

Provisioning set-up

(when using a provisioning system)
Start the Provisioning Wizard
tap the Settings symbol
in the upper right corner. tap
Administrator > Provisioning
and then Start.
NoTe:
When you connect a MX or eX system for the first time,
the Provisioning Wizard starts automatically.
enter required parameters
enter the parameters required for the chosen provisioning infrastructure (see illustrations below). then tap
Webex TelePresence
upon ordering the Cisco Webex telepresence service, you
have received a
Video number
and an
Please contact your company's Webex telepresence administrator
if you do not have a video phone number and an activation code.
Configure Your TelePresence Unit
Back
WebEx Telepresence is a subscription based video
service from Cisco. Enter the video number and activa-
tion code you received when you subscribed to the
service. If you don't have this information, contact
your company's WebEx Telepresence administrator.
Infrastructure
WebEx Telepresence
Video number
Activation code
Cancel
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction
User interfaces
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
•
Webex telepresence
•
Cisco uCM (unified Communications Manager)
•
Cisco VCS (Video Communication Server)
tap
Next
to proceed.
Cisco UCM
Contact your uCM provider to get the iP address or dNS name
Activation
code.
of the Cisco uCM
You can find more details about setting up Cisco uCM provi-
sioning in the
Back
Infrastructure
External Manager
Register
* the dHCP server can be set up to provide the external Manager
address automatically (dHCP option 150). Any input in the input field
overrides the setting provided by dHCP.
Confirguration
Configuration
Register
to complete the procedure.
(External
Manager).*
Administering tC endpoints on CuCM
Configure Your TelePresence Unit
Cisco UCM
Delete old Certifcate Trust List (CTL) file
Cancel
Register
13
Appendices
Configure Your TelePresence Unit
Select infrastructure:
Cisco VCS
WebEx Telepresence
Cisco UCM
Cisco VCS (for EX Series and MX Series only)
Contact your VCS provider to get the iP address or dNS name
of the Cisco VCS
(External
required, the
Username/Password
system with the provisioning server.
guide.
Have a look at the
Cisco VCS provisioning for eX Series and
MX Series
appendix for more information on VCS provisioning.
Configure Your TelePresence Unit
Back
Infrastructure
Username
Password
Domain
External Manager
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
Cancel
Next
Manager), the SiP Domain, and, if
for authenticating the video
Cisco VCS
Cancel
Register