Sony CCU-590P Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sony CCU-590P. Sony CCU-590P 18 pagina's. Camera contol unit
Ook voor Sony CCU-590P: Brochure & specificaties (14 pagina's), Bedieningshandleiding (18 pagina's)

Pagina afdrukken

Overview

The CCU-590/590P Camera Control Unit provides a

variety of remote control and adjustment functions for the

processing of signals from a BVP-E10/E10P/E10WS/

E10WSP/E30/E30P/E30WS/E30WSP CCD Color Video

Camera, and can be used in Electronic Field Production

(EFP) or studio work.

The CCU-590/590P has the following features:

Wide variety of system configurations

• The optional CA-905K/F/T large-lens adaptor allows a

large lens to be fitted onto the portable video camera and

used in conjunction with the BVF-77/77CE 7-inch B/W

Viewfinder.

• 3 output lines (composite video or SDI can be selected as

the output signal) are provided.

• When equipped with the optional RM-B750 Remote

Control Unit, the RM-B750 can be used to control the

video camera directly, without the use of a RCP-750/

751/920/921 Remote Control Panel.

Note

When the CCU-590/590P is connected to the CNU-700

Camera Network Unit and the RM-B750 is attached to the

front panel of the CCU-590/590P, control on the camera

system from the RM-B750 cannot be carried out.

• The CCU-590/590P supports communications between

the video camera and the CCU-590/590P over either a

triax cable or coaxial cable. (Power, however, is not

supplied to the video camera in the case of coaxial

cable.)

10-MHz, wideband triax transmission

• Wideband triax transmission with Y signal at 10 MHz,

R-Y and B-Y signals at 6 MHz is used for inputting

video signals from the video camera. The triax cable

length can be extended from 50 to 700 m (with Fujikura

φ8.5 mm cables), 75 to 1,050 m (with BELDEN 9232

φ13.2 mm cables), or 100 to 1,400 m (with Fujikura

φ14.5 mm cables).

• The CCU-590/590P supports teleprompter signal

transmission. Teleprompter signals can be transferred

over distances of 50 to 500 m (with Fujikura φ8.5 mm

cables), 75 to 750 m (with BELDEN 9232 φ13.2 mm

cables), or 100 to 1,000 m (with Fujikura φ14.5 mm

cables).

Rack mountable

Two CCU-590/590Ps can be mounted side by side in a

standard 19-inch EIA rack when using an optional RMM-

301 Rack Mount Adaptor.

Overview

Note

Production of some of the peripherals and related devices

described in this manual has been discontinued. For advice

about choosing devices, please contact your Sony dealer or

a Sony sales representative.