Sony CCU-790P Bedieningshandleiding - Pagina 12
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sony CCU-790P. Sony CCU-790P 18 pagina's. Camera control unit
Ook voor Sony CCU-790P: Brochure & specificaties (14 pagina's)
Pagina afdrukken
Page 1
TRIAX Type: Type of Triaxial circuit
TRIAX Cable: Triax cable connection status (connected/
disconnected)
TRIAX Comp.: Cable compensation of a triax cable
(automatic/manual)
TRIAX Step: Compensation step of the triax cable (step
indication in the circuit) (The cable length may not be
displayed correctly.)
Fan Power: Fan status in the CCU power block
Timer: Power up time to devices connected
CCU Power: Status of the CCU power supply
SerialNo: Serial number of the CCU
Page 2
CAMERA Cable: Camera cable connection status
(connected/short-circuited)
CAMERA Data: Camera data transmission status
CAMERA Power: Power supply status of the camera
CAMERA Tone: Camera ID tone status
RCP/CNU Cable: Connection status of the REMOTE
connector (connected/short-circuited)
RCP/CNU Data: Data transmission status of the
REMOTE connector
RCP/CNU Power: Power supply status of the REMOTE
connector
12
Self-Diagnostics
Page 3
Intercom CCU: CCU intercom selection
Intercom CAMERA CH1: Status of intercom 1 of the
camera (producer line/engineer line)
Intercom CAMERA CH2: Status of intercom 2 of the
camera (producer line/engineer line)
CHU MIC Gain: Gain and control status of the
microphone circuit
Settings of the network
The following pages appear only when the CCU-790/790P
is set so that it connects to the system through the Ethernet.
In order for the CCU-790/790P to establish connection via
Ethernet, internal settings must be made.
For details on the internal settings, consult your Sony
service personnel.
The network settings are displayed in 3 pages.
Page 1
MacAddress: Mac address of the CCU-790/790P
Auto Negotiation: Auto-negotiation setting
Auto Mdix: Auto-MDIX setting
Connect Speed: Connection speed setting
Duplex Mode: Duplex mode setting
MDI/MDIX Select: MDI/MDIX setting
Link Status: Ethernet connection status