Cisco TelePresence System Codec C40 Gebruikershandleiding - Pagina 21
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco TelePresence System Codec C40. Cisco TelePresence System Codec C40 44 pagina's. Telepresence c series
telepresence mx series
telepresence sx series
telepresence ex series
Ook voor Cisco TelePresence System Codec C40: Aan de slag handleiding (42 pagina's), Handleiding voor probleemoplossing (37 pagina's), Gebruikershandleiding (48 pagina's), Aan de slag handleiding (46 pagina's)
Pagina afdrukken
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents
Getting started
Calling participants to add them to an ongoing call (Multiway)
Calling more than one using Multiway is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
While in a call you may add
participants provided that
your system permits to do
so.
Tap Hold to put the
ongoing call on hold...
The call will now be transferred to the Multiway
server and handled from there. This may take a
little while...
D14582.07
User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
Using directories
... then select, in the
usual way, whom to
add to the ongoing
call.
When everything is
ready the
Join
button
will appear. Tap this and
the bottom line will change
to read Meeting. This may take a
little while.
Since the calls have been transferred
to the Multiway server you are still in
a point-to-point call, but now with the
Multiway server as the far end. This applies
to all the other participants as well.
21
In-call features
In-call features
Settings
Once you have selected someone,
tap Start to begin including this
participant in the meeting.
Tap END to disconnect yourself.
The other participants must
do the same to disconnect
themselves from the Multiway
server.
User guide
Contact us
www.cisco.com