Cisco TelePresence System Codec C40 Aan de slag handleiding - Pagina 22
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco TelePresence System Codec C40. Cisco TelePresence System Codec C40 46 pagina's. Telepresence c series
telepresence mx series
telepresence sx series
telepresence ex series
Ook voor Cisco TelePresence System Codec C40: Gebruikershandleiding (44 pagina's), Aan de slag handleiding (42 pagina's), Handleiding voor probleemoplossing (37 pagina's), Gebruikershandleiding (48 pagina's)
Pagina afdrukken
Cisco TelePresence Video Systems
Contents
Setting the Administrator settings menu password
When starting up the system for the first time, the Administrator
Settings menu password is not set.
NOTE:
We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to
Home > Settings > Administrator settings > Set menu
password.
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select
Save
to confirm the changes, or
without saving.
4. Press
Home
(
) to exit.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
Cancel
to leave
Configuration
Configuration
22
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.