Argo Holly Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo Holly. Argo Holly 13 pagina's.

USE WITH WINDOW UNIT KIT (accessory managed separately)

1. Make a hole having a diameter of roughly 133

mm on the glass window.

3. Insert the round fitting into the retractable flexible

pipe and insert the latter with its round fitting into

the window unit without the plug.

If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.

Connect the power cord to a suitable electric socket (220-240V). Insert the supplied batteries into the remote control and

make sure the poles match. Select the desired operating mode from the remote control.

This appliance can be used for cooling, dehumidifying and ventilation purposes.

Before using the appliance, leave it standing erect for at least two hours.

When switching between modes, the fan continues to turn but the compressor stops: the compressor will re-start after 3

minutes. This delay protects the compressor from potential damage.

Cooling, Ventilation

THE DRAINAGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES: the only exception is when the

appliance is used in dehumidification mode only, in which case the appliance should be left to discharge directly

into the room for maximum efficiency (see the "Dehumidification Mode" paragraph).

Clean the air filters under the easily removable rear grille regularly to keep the air conditioner working efficiently.

V 12/17

2. Insert the window unit into the window.

4. Insert the round fitting onto the flexible pipe.

5. Insert the flexible pipe thus mounted into the rear of the

air conditioner.

HOW TO USE THE APPLIANCE

Dehumidifying