Cisco TelePresence System Codec C90 Gebruikershandleiding - Pagina 34

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco TelePresence System Codec C90. Cisco TelePresence System Codec C90 44 pagina's. Telepresence system
Ook voor Cisco TelePresence System Codec C90: Handmatig (25 pagina's), Aan de slag handleiding (42 pagina's), Handleiding voor probleemoplossing (37 pagina's), Handleiding installeren (2 pagina's), Gebruikershandleiding (48 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200

Contents

Getting started

Administrator settings—Call settings

The Call Settings pane lets you specify:

•

Auto Answer On or Off. If you set this to On, the

system will respond automatically to incoming calls.

Note that the microphone will NOT be muted. If risk of

eavesdropping is an issue, you may want to set this

setting to Off.

•

Auto Answer Delay. Specify the time until your

system actually responds to an incoming call.

•

Default Call Rate. If your connection has limited

capacity you may want to use this setting.

•

Max Incoming/Outgoing Bandwidth. You may

specify these separately. May come in handy if you

are on an asymmetric connection.

•

Default Call Protocol. Specify which protocol to use

as default.

Note how the settings chosen are indicated. In the

example shown, Auto Answer is set to Off.

D14582.07

User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.

Placing calls

Using directories

In-call features

Settings

User guide