DigiTech Drop Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DigiTech Drop. DigiTech Drop 8 pagina's. Polyphonic droptune
Ook voor DigiTech Drop: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (8 pagina's)

Pagina afdrukken

4. Momentary On/Off Switch

Selects how the E ect footswitch will operate. Setting this switch to "ON" will cause the E ect

footswitch to act as a momentary switch (the e ect will be enabled only as long as the E ect

footswitch is pressed and held, see below note). Setting this switch to "OFF" will cause the E ect

footswitch to act as a standard latching on/o switch (the e ect will be toggled on and o with each

press of the E ect footswitch).

NOTE:

If the Drop e ect is enabled (E ect LED on) before setting the Momentary switch to

the "ON" position, the E ect footswitch will bypass the Drop e ect when pressed and held. If the

Drop e ect is disabled (E ect LED o ) before setting the Momentary switch to the "ON" position,

the E ect footswitch will enable the Drop e ect when pressed and held.

5. Output Jack

Connect this jack to the input of an amp, input of the next pedal on your pedalboard, or the e ects

return of an amp e ects loop.

6. Input Jack

Connect your instrument to this jack.

7. Effect LED

Shows the on/o status of the Drop e ect. This LED lights to indicate the Drop e ect is on. When

the Drop e ect is bypassed, this LED will be o .

8. Effect Footswitch

Turns the Drop e ect on and o .