Argo Polifermo Teddy Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo Polifermo Teddy. Argo Polifermo Teddy 8 pagina's. Evaporative air cooler

A. Top panel

B. Control panel

C. Ignition indicator

D. Remote control sensor

E. Lateral air otulet

F. Lateral air outlet

G. Frontal air outlet

H. Front shell

Water level display window

The appliance does not need to be installed.

Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (220-240 V~): the

appliance can be switched on using the ON/OFF button. The unit can be switched off using the OFF button and you will

hear a sound. When you move it, use the handle on the back. Do not use this cooler in an area with high humidity, rich in

dust or with a temperature above 40° C.

This product can be used either as a fan, with 3 modes (Fan, Natural, Sleep) and 3 fan speed options (low, medium and

high), or as a cooler/humidifier when pressing the COOL AIR button: in this case the rear tank should be filled with

demineralized

water, up to but not exceeding the maximum level as indicated. When the water in the tank falls below the

minimum level, marked on the tank, the appliance emits a sound for a few seconds to signal a low water level, and the

LED COOL will start blinking for about 10 seconds, then the sound stops and the cooling mode is stopped.

The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly

humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes

part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes

it feel as though the temperature has dropped.

V 01/18

DESCRIPTION OF PARTS

J. Back shell

K. Handle and remote control compartment

L. Reel

M. Power cord

N. Air filter

O. Evaporative filter

P. Tank lock

Q. Multidirectional wheels

R. Remote control