Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor Hardware installatiehandleiding - Pagina 21

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor. Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 36 pagina's. User guide

Pagina afdrukken

Chapter 2

Installing the Cisco ONS 15530

SFPs with RJ-45 connectors require cabling after it is installed, and removal of cables is required before

Note

removing the SFP from the card.

Removing SFP Optics with MT-RJ Connectors

Note

You need the SFP extraction and cable installation and removal tool to remove the SFP with the MT-RJ

connector.

To remove an SFP with an MT-RJ connector from the ESCON aggregation card, follow these steps:

Remove the cable from the desired SFP.

Step 1

Remove the SFP from the module by pushing against the lever on the SFP to release it from the module.

Step 2

(See

OL-7706-01

Figure

2-17.)

Installing and Removing Line Cards or Motherboards

Cisco ONS 15530 Hardware Installation Guide

2-21