Cisco 2610 - Router - EN Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 2610 - Router - EN. Cisco 2610 - Router - EN 19 pagina's. Cisco 2610: quick start
Ook voor Cisco 2610 - Router - EN: Gegevensblad (8 pagina's)

Pagina afdrukken
2
Connect Cables (continued)
MODEMS
16AM
15
14
13
12
11
IN USE
7
6
5
4
3
10BaseT cable

Connect the Ethernet Cable

Position the router so you can reach the rear panel.
The cables and the router's ports are color-coded to
help you make the right connections.
1
Connect one end of the yellow Ethernet cable
into the yellow Ethernet 10BaseT (RJ-45) port
labeled ETHERNET 0/0 on the rear panel of
your router.
2
Connect the other end of the yellow Ethernet
cable into any available port on your 10BaseT
hub or switch (not included).
10
9
8
IN USE
SERIAL 1
SERIAL 0
CONN
WIC
CONN
2A/S
CONN
2
SEE MANUAL BEFORE INSTALLATION
1
0
EN
SEE MANUAL BEFORE INSTALLATION
LINK
ETHERN ET 0 ACT
CONSOL E
Ethernet 10BaseT
port (RJ-45)
SERIAL 1
100-240V – 1A
50/60 Hz 47 W
SERIAL 0
WIC
CONN
2T
AUX
Ethernet hub
(sold separately)
3
Make sure a PC (running Windows NT 4.0 or
Windows 95) is connected to the Ethernet LAN.
You will use this computer in the procedure on
page 9 to run Cisco Fast Step software to
configure the router.
5