Cisco 2800 Series Overzicht - Pagina 11

Blader online of download pdf Overzicht voor {categorie_naam} Cisco 2800 Series. Cisco 2800 Series 27 pagina's. Cisco ios software configuration
Ook voor Cisco 2800 Series: Snelstarthandleiding (13 pagina's), Gegevensblad (8 pagina's), Snelstarthandleiding (47 pagina's), Toepassingsnotitie (41 pagina's), Snelstarthandleiding (45 pagina's), Configuratie (10 pagina's), Gegevensblad (5 pagina's), Gegevensblad (20 pagina's), configureren (32 pagina's)

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with

Warning

the same or equivalent type recommended by the manufacturer. Dispose of used batteries according

to the manufacturer's instructions. Statement 1015

Chassis Views

This section contains views of the front and rear panels of the Cisco 2800 series routers, showing

locations of the power and signal interfaces, module slots, status indicators, and chassis identification

labels.

Cisco 2801 Chassis

Figure 7

Double-wide HWICs can go into slots 0 and 1, and into slots 2 and 3.

Slot 0 does not support PRI on T1/E1 VWICs, only channel-associated signaling (CAS) digital voice.

Note

OL-5783-01

shows the front panel of a Cisco 2801 router.

Front Panel of the Cisco 2801 Router

11 12

Slot 0 (VIC or VWIC, for voice only)

Slot 1 (WIC, VIC, VWIC, or HWIC)

Slot 2 (WIC, VIC, or VWIC)

Slot 3 (WIC, VIC, VWIC, or HWIC)

Console port

Fast Ethernet ports and LEDs

System LEDs

Figure 8

Auxiliary Power (AUX/PWR) LED

Universal serial bus (USB) port

10 AIM/PVDM LEDs

11 Auxiliary port

12 Compact flash (CF) LED

13 External CompactFlash memory card slot

14 Removable center card guides to allow

double-wide HWIC-D installation

shows the back panel.

Overview of Cisco 2800 Series Routers

Chassis Views