Cisco 3110 Aan de slag

Blader online of download pdf Aan de slag voor {categorie_naam} Cisco 3110. Cisco 3110 42 pagina's.
Ook voor Cisco 3110: Handmatig (42 pagina's)

Getting Started

The following topics explain how to get started configuring the Firepower Threat Defense (FTD) .

•

Is This Guide for You?

This guide explains how to configure Firepower Threat Defense using the Firepower Device Manager (FDM)

web-based configuration interface included on the Firepower Threat Defense devices.

The FDM lets you configure the basic features of the software that are most commonly used for small or

mid-size networks. It is especially designed for networks that include a single device or just a few, where you

do not want to use a high-powered multiple-device manager to control a large network containing many

Firepower Threat Defense devices.

If you are managing large numbers of devices, or if you want to use the more complex features and

configurations that Firepower Threat Defense allows, use the Firepower Management Center (FMC) to

configure your devices instead of the integrated FDM.

You can use the FDM on the following devices.

Table 1: FDM Supported Models

Device Model

Firepower 1010, 1120, 1140

Firepower 1150

Firepower 2110, 2120, 2130, 2140

Secure Firewall 3110, 3120, 3130, 3140

Firepower 4110, 4115, 4120, 4125, 4140, 4145, 4150

Firepower 4112

Is This Guide for You?, on page 1

New Features in FDM/FTD Version 7.1.0, on page 2

Logging Into the System, on page 7

Setting Up the System, on page 11

Configuration Basics, on page 32

Minimum FTD Software Version

6.4

6.5

6.2.1

7.1

6.5

6.6

Getting Started