Sony XDCAM PDW-U1 Bedieningshandleiding - Pagina 21

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sony XDCAM PDW-U1. Sony XDCAM PDW-U1 38 pagina's. Professional disc drive unit
Ook voor Sony XDCAM PDW-U1: Brochure & specificaties (18 pagina's), Brochure & specificaties (28 pagina's), Brochure (26 pagina's), Brochure (28 pagina's), Bedieningshandleiding (40 pagina's), Bedieningshandleiding (36 pagina's)

Pagina afdrukken

Storage

• Do not store discs where they may be

subjected to direct sunlight, or in other

places where the temperature or humidity

is high.

• Do not leave cartridges where dust may

be able to gain ingress.

• Store cartridges in their cases.

Care of the discs

• Remove dust and dirt on the outside of a

cartridge using a soft dry cloth.

• If condensation forms, allow ample time

to dry before use.

3-4-3 Write-Protecting

Discs

To protect the content recorded on the disc

from accidental erasure, move the write-

protect tab on the lower surface of the disc

in the direction of the arrow, as shown in the

following figure.

Lower surface

of the disc

Slide in the direction

Write Inhibit

of the arrow

tab settings

SAVE

Recording

disabled

enabled

Write Inhibit tab

3-4-4 Loading and

Unloading a Disc

To load and unload a disc, press 1 (power)

button to turn the unit on and light the

indicator, and follow the procedures

indicated in the next illustration.

To load

With the label

surface on the right,

insert the disc.

The disc is drawn in.

When a disc is loaded, the DISC IN

indicator lights.

Note

If an unformatted disc is loaded to the unit

when the unit is connected to a Macintosh

computer, select U1 Utility > Eject from the

menu of the Utility software to unload the

disc.

3-4-5 To Eject Discs With

the Unit Powered Off

When the power is not supplied, it may not

be possible to eject discs by pressing the

EJECT button. In these situations, you can

use the following as an emergency

procedure to eject a disc manually.

Power the unit off.

DISC IN indicator

To unload

Press the

EJECT button.

3-4 Handling Discs