Cisco 3600 Series Configuratie Opmerking - Pagina 17

Blader online of download pdf Configuratie Opmerking voor {categorie_naam} Cisco 3600 Series. Cisco 3600 Series 25 pagina's. Memory upgrade
Ook voor Cisco 3600 Series: Productoverzicht (10 pagina's), Upgrade-instructies (30 pagina's), Gebruikershandleiding (17 pagina's), Toepassingsnotitie (41 pagina's), Configuratiehandleiding (36 pagina's), Gebruikershandleiding (25 pagina's), Bijlage (15 pagina's), Gebruikershandleiding (7 pagina's), Handmatig (5 pagina's), Configuratie Opmerking (23 pagina's), Configuratie Opmerking (18 pagina's)

Figure 12

SIMM polarization notch

Installing Flash-Memory SIMMs

Follow this procedure to install Flash-memory SIMMs:

Step 1

Caution

damaged by mishandling.

Step 2

Step 3

Removing Flash-Memory SIMMs

Top view

Find the Flash-memory SIMM sockets on the Cisco 3600 series motherboard.

(See Figure 10 and Figure 11.)

Handle SIMMs by the edges only. SIMMs are ESD-sensitive components and can be

Hold the SIMM with the polarization notch on the right and the component side away

from you, with the connector edge at the bottom.

Referring to Figure 13, insert the Flash-memory SIMM into its connector slot at an angle,

tilted toward the left side of the chassis. Rock the SIMM into a vertical position, using the

minimum amount of force required. When the SIMM is properly seated, the socket guide

posts ﬁt through the alignment holes, and the locking springs click into place. Use the

minimum amount of force required.

1. Pull the locking spring clips outward.

2. Push the top of the SIMM

forward and down.

Front of chassis

Cisco 3600 Series Memory Upgrade Configuration Note

Upgrading Flash Memory