Cablematic BLE RS-232 Series Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Cablematic BLE RS-232 Series. Cablematic BLE RS-232 Series 9 pagina's.

Pagina afdrukken
BLE RS-232 adapter user manual V1.0
UUID_NOTIFY (~20 bytes)
UUID_RxData (~20 bytes)
UUID_MacID (6 bytes)
UUID_DeviceName (15 bytes)
UUID_Reboot (1 bytes)
UUID_PinID_Setting (6 bytes)
UUID_BLE_CONF (7 bytes)
Byte0
Data bit
7,8
Byte4
Baud Rate
00:9600
01:19200
02:38400
03:57600
04:115200
05:230400
06:2400
07:4800
08:1200
09：460800
10：921600
6. Command set via COM port:
Command
Value
AT
AT
(Default)
N
?
BAUD=
1200
Byte1
Byte2
Hwfc
Stop Bit
0x01:on
2:1
0x00:off
3:1.5
4:2
Byte5
Device Mode
0x01:on
0x00:off
Description
Check the connection status between control terminal and the RS-232
adapter. Response: "OK" when the connection is ok. Response:
"ERROR" when the connection is not ok.
Test the RS-232 status when first connect the adapter with the
controller.
The command will disable the auto link function.
Inquire the current setting.
This command is used to specify the baud rate of COM port.
The command will need 200 ms delay.
1200 bps
5
00031234-0000-1000-8000-00805F9B0130
00031234-0000-1000-8000-00805F9B0131
00031234-0000-1000-8000-00805F9B0133
00031234-0000-1000-8000-00805F9B0134
00031234-0000-1000-8000-00805F9B0135
00031234-0000-1000-8000-00805F9B0136
00031234-0000-1000-8000-00805F9B0132
Byte3
Parity Bit
0x02 : No Parity
0x01 : Odd Parity
0x00 : Even Parity
Byte6
Reset To Default
0x01: Reset
2018.05.22