Cisco 6160 Handleiding voor installatieprocedures - Pagina 10

Blader online of download pdf Handleiding voor installatieprocedures voor {categorie_naam} Cisco 6160. Cisco 6160 32 pagina's. Without a pots splitter configuration
Ook voor Cisco 6160: Snelle referentiehandleiding (38 pagina's), Hardware installatiehandleiding (21 pagina's), Installatie en vervanging Opmerkingen (18 pagina's)

Installation Procedures

Use a flat-head screwdriver and a counterclockwise motion to open the grounding terminal connector on

Step 5

the power terminal block. This step ensures that the correct opening is presented for the wires. (See

Figure

Figure 4-5

Correct terminal

position (open)

Step 6

Insert one end of the grounding wire into the grounding receptacle, which is the bottom receptacle in the

power terminal block connector (Callout 3 in

inserted into the terminal block so that no bare wire is exposed.

Figure 4-6

Power lead wire connection

Battery return wire connection

Step 7

Verify that no wire strands are left outside the connector.

Cisco 6160 Hardware Installation Guide

4-10

4-5.)

Positioning the Power and Ground Terminals to Accept Wires

Incorrect terminal

position (closed)

Inserting the Grounding and Power Wires into the Power Terminal Block Connector

PEM 1

-48/-60V

35A

, 1280VA

Chapter 4

Installing a Cisco 6160 Without a POTS Splitter Configuration

Figure

4-6). The stripped part of the wire must be fully

Grounding wire connection

OL-2190-02 B0