Cisco 7505 Handleiding voor installatie-instructies - Pagina 2

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Cisco 7505. Cisco 7505 15 pagina's. 600w ac-input power supply and fan tray replacement
Ook voor Cisco 7505: Handleiding vervangende instructies (23 pagina's), Snelstarthandleiding (32 pagina's), Handleiding vervangende instructies (18 pagina's)

Product Overview

The Cisco 7010 is the ﬁve-slot model in the Cisco 7000 series product line and the Cisco 7505 is the

ﬁve-slot model in the Cisco 7500 series. Figure 1 shows the interface processor end of the Cisco

7010 chassis.

Note

the same.

The interface processor end of the chassis contains the processor slots, the AC power receptacle (a

DC-input power supply is available, but not shown), the power switch, the DC OK status LED, and

a screw for a chassis ground connection. The noninterface processor end of the chassis is a

removable panel (secured with two captive slotted screws) that provides access to the internal

components. For a complete description of the chassis, refer to the Cisco 7010 Hardware

Installation and Maintenance or Cisco 7505 Hardware Installation and Maintenance publications.

Figure 1

On/off

power switch

You can mount the chassis in most standard 19-inch or Telco-type equipment racks, with either end

of the chassis at the front of the rack. Ideally, you should be able to access both ends of the router

without having to remove it from the rack. Because the interface processor end provides access to

the power switch, processor slots, and all status LEDs, we recommend that you mount the router

with the interface processor end at the front, or most accessible side, of the rack.

The rack-mount kit comprises two chassis ears that attach to the sides of the chassis at either the

interface processor or noninterface processor end, four fasteners to secure the ears to the chassis, and

eight fasteners to secure the ears to the mounting strips or posts on the equipment rack.

2 Cisco 7010 and Cisco 7505 Rack-Mount and Cable Management Kits Installation Instructions

For the procedures in this publication, the Cisco 7010 and Cisco 7505 chassis are functionally

Noninterface Processor End of the Cisco 7010 Chassis

AC power

receptacle

Chassis

ground

DC OK

power indicator

Power supply