Cisco 7513 Series Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 7513 Series. Cisco 7513 Series 30 pagina's. Chassis replacement
Ook voor Cisco 7513 Series: Snelstarthandleiding (44 pagina's), Handleiding vervangende instructies (26 pagina's), Gegevensblad (11 pagina's), onderhouden (20 pagina's), Handleiding vervangende instructies (19 pagina's), Handleiding vervangende instructies (22 pagina's)

Document Contents

This publication contains the following sections:

•

Note

Cisco 7500 Series Installation and Conﬁguration Guide, available in print or on the Document

CD-ROM that came with your shipment.

The Cisco 7513 is a 13-slot router that supports multiprotocol, multimedia routing and bridging with

a wide variety of protocols and any combination of available electrical interfaces and media.

Network interfaces reside on interface processors that provide a direct connection between two

CyBuses in the Cisco 7513 and your external networks. The Cisco 7513 has 13 slots: interface

processor slots 0 through 5, Route Switch Processor (RSP) slots 6 and 7, and interface processor

slots 8 through 12.

There are bays for up to two AC-input or DC-input power supplies. The chassis will operate with

one power supply. While a second power supply is not required, it allows load sharing and increased

system availability. The Cisco 7513 is shown in Figure 1. The three front-panel LEDs indicate

system and power supply status, and LEDs on the RSP, interface processors, and power supplies

indicate status.

2 Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions

For detailed information and speciﬁcations on the Cisco 7513 and Cisco 7576, refer to the