Argo LILIUM ART 11 Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo LILIUM ART 11. Argo LILIUM ART 11 14 pagina's.

We advise removing the tank once every two weeks to prevent mould and bacteria forming on it. Fill the tank with clean

water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.

If the unit is not used for a long period of time, it is necessary to carry out the following operations before storing it.

1. Turn off the device with the Power button and unplug the power cord from the power outlet.

2. Eliminate the water deposited in the water tank and dry it thoroughly

3. Clean the air filter and let it dry completely

4. Place the power cord in the water tank

5. Replace the filter

6. Store the device in an upright position and in a cool, dry and ventilated place.

V 02/22

CLEANING THE WATER TANK

The filter is designed to remove dust or dirt from the air.

If the filter is clogged by dust, electricity consumption will be

higher than normal.

Cleaning instructions:

2. 2. Reposition the filter by inserting it as indicated by

CONSERVATION AND STORAGE

Remove the water tank, then remove the filter by

pulling it out from below, following the direction of

the arrow.

Clean the filter by washing it with warm soapy water

DO NOT USE ALCOHOL, BENZENE OR OTHER

AGGRESSIVE PRODUCTS

Allow the filter to dry naturally, then insert it back

into its housing.

Do not use hair dryer or fire to dry the filter

Do not use sponges or brushes to clean the filter as

they can damage it

the arrow and replace the water tank.

Do not use the dehumidifier without the filter as dust

may affect the efficiency of the evaporator, resulting

in higher energy consumption.