Argo Wallner BCD 408 Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo Wallner BCD 408. Argo Wallner BCD 408 16 pagina's.

Excess squeaking

and rubbing noise

Paper jam

MALFUNTION / MAINTENANCE

If any faults should appear, please pass the machine along with the warranty card to the

seller or closest authorised dealer. The machine might be passed futher, thus the user

should maintain the original and complete packaging. In cases when the machine is

passed for repair in a not original or incomplete package, the risks of futher damages that

might arise in transportation are on the user's side. Thus, in such a case, it is in the user's

best interest to make the best possible replacement packaging.

NOTE ON ENVIRONMENTAL PROTECTION

After the implementation of the European Directive 2002/96/EU in the national

legal system, the following applies: Electrical and electronic devices may not be

disposed of with domestic waste.

Consumers are obliged by law to return electrical and electronic devices at the

end of their service lives to the public collecting points set up for this purpose or

point of sale. Details to this are defined by the national law of the respective country. This

symbol on the product, the instruction manual or the package indicates that a product is

subject to these regulations. By recycling, reusing the materials or other forms of utilising

old devices, you are making an important contribution to protecting our environment.

Without oiling to the cutting

system periodically.

- Squeaking and rubbing noise at

shredding.

- Exceeding the shredding

capacity

- The paper is not fed squarely

into the feed opening.

Perform the cutter oiling

instruction to lubricate the

cutting system.

Set switch to „R" for reverse

running and frees excess

paper. Then set to „I" for cutting

the remainder of paper left in

the cutting system. If serious

jim occurred, send back to

local service for repair.