Argo Wallner MR 2208 C2 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo Wallner MR 2208 C2. Argo Wallner MR 2208 C2 16 pagina's.

Argo Wallner MR 2208 C2 Gebruiksaanwijzing
CAUTION:
Never use flammable synthetic oil, petroleum based or aerosol lubri-
cants to oil your cutting system. Use only a vegetable oil based lubricant in a non-aerosol
container with extension nozzle:
BASIC EXPLOITATION RULES
It is not advised to cut as many sheets as indicated as the maximum capacity of the
shredder. By exploiting the machine at it's top capacity we significantly reduce it's vitality.
Therefore, to maintain a durable and faultless work of the shredder, it is adviced to place
no more then 70% of the maximum amount of sheets to be shred at one time indicated
for each model by the producer. The maximum amount of sheet should be used only
occasionally.
It is forbidden to shred more sheets then the maximum amount of sheets to be shred
at one time indicated by the producer. It may cause the blockade of the machine and
massive engine overloading, which will diminish shredder's durability or even damage it.
Also you should not shred soft objects such as foil, paper towels, toilet paper or fabrics.
Nor paper with self-adhesive tape should be placed into the shredder. Those materials
wrap around and jam the knifes.
IMPORTANT RECOMMENDATIONS / WARNINGS
For your own safety please maintain particular care while installing and using the machine.
GENERAL
Keep hands, long hair, loose articles of clothing, jewellery and ties away from device
to avoid serious injury.
Unstable surfaces may cause the fall of the device, which can result in body injuries.
Please avoid fast stopping, use of additional force or surface unevenness while
transporting the device on trolley, casters or table.
Do not remove mechanical and electrical securities such as locks, covers or others.
It is forbidden to use objects not dedicated to do so or liquids.
ELECTRICAL
The machine should be plugged to the electric circuit only as presented in the manual.
The socket must be in close vicinity with easy access to the device. While moving the
machine, pull the plug from the socket.
To turn off the appliance unplug it from the socket. Socket should be in close vicinity
with easy access to device.
Do not use the machine when the wire or plug are damaged or after noticing symptoms
of machine's damage. Please contact seller to obtain help.
When the device is equipped with a plug with grounding, then it has to be connected
to a socket with grounding!
© ARGO S.A.
EN
13
www.argo.pl