Cisco Aironet 1430 Series Aan de slag handleiding - Pagina 13

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Aironet 1430 Series. Cisco Aironet 1430 Series 48 pagina's. Wireless bridge

Pagina afdrukken

• Root—Specifies that the bridge connects directly to the main Ethernet LAN network and

accepts associations from other bridges.

• Non-root—Specifies that the bridge connects to a remote LAN network and must

associate with the root bridge using the wireless interface.

Note

When initially powered up, the bridge is configured in Install mode with automatic detection

activated.

• Optimize Radio Network for—Use this setting to select either preconfigured settings for

the bridge radio or customized settings for the bridge radio.

Throughput—Maximizes the data volume handled by the bridge but might reduce its

–

range.

Range—Maximizes the bridge's range but might reduce throughput.

–

Default—The bridge retains default radio settings that are designed to provide good

–

range and throughput for most bridges.

Custom—The bridge uses settings you enter on the Network Interfaces:

–

Radio-802.11a Settings page. Clicking Custom takes you to the Network Interfaces:

Radio-802.11a Settings page.

Click Apply to save your settings. If you changed the IP address, you lose your

–

connection to the bridge. Browse to the new IP address to reconnect to the bridge.

You can restore the bridge to its factory defaults by unplugging the power injector's power

Note

jack and plugging it back in while holding down the Mode button for a few seconds, or until

the Status LED turns amber.

Default Settings on the Express Setup Page

Table 1 lists the default settings for the settings on the Express Setup page.

Table 1

Default Settings on the Express Setup Page

Setting

System Name

Configuration Server Protocol

THIRD FCC DRAFT (CISCO CONFIDENTIAL)

Default

Bridge

DHCP