Cisco Aironet 1430 Series Aan de slag handleiding - Pagina 3

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Aironet 1430 Series. Cisco Aironet 1430 Series 48 pagina's. Wireless bridge

Pagina afdrukken

Warning

Do not locate the antenna near overhead power lines or other electric light or power

circuits, or where it can come into contact with such circuits. When installing the

antenna, take extreme care not to come into contact with such circuits, because they

may cause serious injury or death. For proper installation and grounding of the antenna,

please refer to national and local codes (for example, U.S.:NFPA 70, National Electrical

Code, Article 810, Canada: Canadian Electrical Code, Section 54).

Statement 1052

Warning

This product relies on the building's installation for short-circuit (overcurrent)

protection. Ensure that the protective device is rated not greater than:

120 VAC, 15A U.S. (240 VAC, 10A International)

Statement 1005

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the

equipment in the absence of a suitably installed ground conductor. Contact the

appropriate electrical inspection authority or an electrician if you are uncertain that

suitable grounding is available.

Statement 366

Warning

Read the installation instructions before connecting the system to the power source.

Statement 1004

Warning

Do not work on the system or connect or disconnect cables during periods of lightning

activity.

Statement 1001

Warning

Do not operate your wireless network device near unshielded blasting

explosive environment unless the device has been modified to be especially qualified for

such use.

Statement 245B

THIRD FCC DRAFT (CISCO CONFIDENTIAL)

caps or in an