Sony PMW-100 Gebruiksaanwijzing - Pagina 21

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Sony PMW-100. Sony PMW-100 32 pagina's. Solid-state memory camcorder
Ook voor Sony PMW-100: Brochure & specificaties (8 pagina's), Brochure & specificaties (6 pagina's), Aan de slag (2 pagina's), Gebruiksaanwijzing (31 pagina's)

Pagina afdrukken

"Exposure" ("Recording" in operating

instructions (PDF))

"Gain" ("Recording" in operating instructions

(PDF))

"Electronic Shutter" ("Recording" in

operating instructions (PDF))

"White Balance" ("Recording" in operating

instructions (PDF))

Note

AF (Auto Focus) is not activated by setting the

camcorder to Full Auto mode.

For information of automatic focus adjustment,

see "Focus" ("Recording" in operating

instructions (PDF)).

Press the REC START/STOP button.

You can also start recording with the REC

START button on the grip.

(If you are using the IR Remote Commander, press

the REC button simultaneously with the unmarked

button.)

The front and rear tally lamps light and

recording begins.

To stop recording, press the REC

START/STOP button again.

You can also stop recording with the REC

START button on the grip.

(If you are using the IR Remote Commander, press

the REC PAUSE button simultaneously with the

unmarked button.)

Recording stops and the camcorder enters

STBY (recording standby) mode.

Note

If you press the REC START/STOP button to start next

recording while previous data writing is not completed,

the message "Cannot Proceed" may be displayed and

recording may not start.

To prevent a switching error

The REC START/STOP button on the handle is

incorporated with the REC HOLD lever. If the

REC START/STOP button on the handle will not

be used, it is recommended to set the lever to the

HOLD position to lock the button and prevent

unintentional starting/stopping of recording if

you accidentally press the button.

To unlock the button, return the lever to its

original position.

Checking the last recorded clip (Rec

Review)

Press the REC REVIEW button.

The Rec Review function ("Recording" in

operating instructions (PDF)) is activated,

and the last recorded clip is played back for

the specified time on the LCD monitor/EVF

screen.

To delete clips

You can delete the last recorded clip by using the

Last Clip DEL function ("Recording" in

operating instructions (PDF)). Use the All Clips

DEL function ("Recording" in operating

instructions (PDF)) to delete all recorded clips

from an SxS memory card. To specify a clip to be

deleted, operate the camcorder from the

thumbnail screen ("Playback" in operating

instructions (PDF)).

Clip (recording data)

When you stop recording, video, audio and

subsidiary data from the start to end of the

recording are recorded as a single clip on an

SxS memory card.

Clip name

For each clip recorded with this camcorder, a

clip name is automatically generated according

to the method selected with "Auto Naming" in

"Clip" ("Menu Configuration and Detailed

Settings" in operating instructions (PDF)) in the

OTHERS menu.

The default setting of "Auto Naming" is "Plan."

With this setting, a clip name defined in

planning metadata is applied if a planning

metadata file is loaded into the camcorder.

Change the "Auto Naming" setting to "Title" to

apply a clip name composed of 4 to 46

alphanumerics and 4 numerics.

Example: ABCD0001

The block of 4 to 46 alphanumerics can be

specified as desired using "Clip" in the

OTHERS menu before you start recording. (It

cannot be changed after recording.)

The value of the 4 numerics is automatically

counted up in sequence.

Basic Operation Procedure