Sony XC-ST50CE Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Sony XC-ST50CE. Sony XC-ST50CE 31 pagina's. Black-and-white video camera module
Ook voor Sony XC-ST50CE: Specificaties (4 pagina's), Producthandleiding (2 pagina's), Technisch handboek (30 pagina's), Technisch handboek (31 pagina's), Handmatig (4 pagina's)
Pagina afdrukken
XC-ST50/50CE
XC-ST30/30CE
FRAME IMAGE OUTPUT WITH STROBE LIGHT
A full frame image with vertical resolution of 485 lines (XC-ST50/ST30) or 575 lines (XC-ST50CE/ST30CE) can be
obtained with a strobe light by firing the strobe when the exposure time of the two fields overlap.
Timing and conditions
EXT HD
Continuous signal: 15.734 kHz (XC-ST50/ST30), 15.625 kHz (XC-ST50CE/30CE) Allowable frequency value 1%
EXT VD
VD: XC-ST50/ST30 (1/60 sec), XC-ST50CE/30CE (1/50 sec) Four or more VD pulses are required.
Strobe light
Exposure time for Odd field
Exposure time for Even field
Video output
Odd and even fields are determined by the phase of the EXT HD/VD signal input from the outside.
Avoid lighting the scene during the light-emitting inhibit zone defined below. (The field is transfered to the
storage area of the CCD, so it can be read out.)
Note
: For best performance, it is recommended not to flash between VD and VD + 10H (XC-ST50/ST30)/
16H (XC-ST50CE/ST30CE).
12
<Timing chart by restart/reset>
Odd image
Invalid image
Even image
Valid frame image