Sony XCD-SX90 Servicehandleiding - Pagina 15

Blader online of download pdf Servicehandleiding voor {categorie_naam} Sony XCD-SX90. Sony XCD-SX90 30 pagina's. Digital camera module
Ook voor Sony XCD-SX90: Handmatig (4 pagina's), Technisch handboek (38 pagina's), Technisch handboek (39 pagina's), Gebruiksaanwijzing (2 pagina's)

Pagina afdrukken

2-1. Writing of Serial Number and Node

Unique ID

Perform the writing when replacing the FM-96 board or

front panel assembly.

Required equipment

. Personal computer (PC)

. IEEE1394.b board

. IEEE1394b cable (Commercially available products)

. IIDC_CAM**** software: J-7120-410-A

(**** represents the version number.)

Connection

Camera

IEEE1394b

Personal computer

Preparation

1. Connect each device as shown in the above illustra-

tion.

2. Install the IIDC control software in an arbitrary place

of PC.

Procedure

1. Start the IIDC_CAM****software.

The IIDC control window is displayed.

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR

Section 2

Adjustment

IEEE1394b

cable

xxxxxxxx

2. Click the "Adjust" tab and "Enter Adjust mode" tab.

The unit enters the adjustment mode.

3. Check the model nameplate on the bottom of this unit.

Type the Node Unique ID in the Node Unique ID box

and type the serial number in the Serial Number box.

Lens side

Serial

No.

number

Node Unique ID

Rear side

Type the serial number.

Type the Node Unique ID.

4. Click the [Write] button.

Adjust tab

xxxxxxxx

Model nameplate affixed

to the bottom of this unit

Node Unique ID

[Write] button

xxxxxxxx

2-1