Cisco Aironet 350 Series Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Aironet 350 Series. Cisco Aironet 350 Series 12 pagina's. Managed switches
Ook voor Cisco Aironet 350 Series: Release-opmerkingen (14 pagina's), Snelstarthandleiding (16 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (12 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (10 pagina's), Kennismaking (16 pagina's), Snelstarthandleiding (5 pagina's)

Insert the PCI Client Adapter

Antenna

connector

LEDs

Standard 2 dBi

dipole antenna

Turn off the PC and all its components.

Remove the computer cover.

Note

On most Pentium PCs, PCI

expansion slots are white. Refer to your PC

documentation for slot identification.

Remove the screw from the top of the

CPU back panel above an empty PCI

expansion slot. This screw holds the

metal bracket on the back panel.

Caution

Static electricity can

damage your client adapter. Before

removing the adapter from the

anti-static packaging, discharge

static by touching a metal part of a

grounded PC.

Tilt the adapter to allow the antenna

connector and LEDs to slip through the

opening in the CPU back panel.

Card edge

connector

Press the client adapter into the empty

slot until the connector is firmly seated.

Caution

into the expansion slot as this could

damage both the adapter and the

slot. If the adapter does not insert

easily, remove the adapter and

re-insert it.

Re-install the screw on the CPU back

panel and replace the computer cover.

Attach the 2-dBi antenna to the

adapter's antenna connector until it is

finger-tight. Do not overtighten.

For optimal reception, position the

antenna so it is straight up.

Proceed to the driver installation

instructions for your operating system.

Do not force the adapter