DIGITEN WTC200 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DIGITEN WTC200. DIGITEN WTC200 12 pagina's.
Ook voor DIGITEN WTC200: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (9 pagina's)

Pagina afdrukken
DIGITEN WTC200 Gebruikershandleiding

Heating mode

Set the temperature value RUN<STOP, the controller is in heating
mode, and the LCD displays the HEATING symbol
2.1 When the CURRENT temperature is less than or equal to the RUN
value, the heating operation starts, the relay outputs, the LCD
displays
, the green light on the receiver is on, when the
CURRENT rises to the STOP value, the heating operation stops, the
LCD displays
, the green light on the receiver is off.
2.2 When the CURRENT temperature value is greater than the STOP
value, the heating operation stops, the LCD displays
, the green
light on the receiver is off, when the CURRENT temperature drop to
the RUN value, the heating work starts, the LCD displays
, the
green light on the receiver is on.
High and low temperature alarm
When the CURRENT temperature is greater than the HIGH value or
less than the LOW value, the remote controller will alarm and the
symbol on the
LCD will flash. Press any key to stop
the sound, and the
symbol continues to flash
until the setting value is changed or CURRENT temperature value
returns to the alarm range.
If the transmitter is not powered, the receiver will continue to work