Argo STANDY EVO Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Argo STANDY EVO. Argo STANDY EVO 10 pagina's. Floor fan

The device does not require installation. For its use it is necessary to assemble the parts, as per the instructions below.

Open the package and take out the parts of the appliance.

Remove the Blade Cap from the Motor Shaft by turning it clockwise, and remove the Plastic Mounting Nut from the Fan

Head by rotating anti-clockwise. Put the Rear Fan Grill on the Fan Head by align the Position Holes and Lock the Plastic

Mounting Nut on to the Fan Head to fix the Rear Fan Grill on to the Fan Head. Do not over force the Plastic Mounting Nut.

Make the fan blade Groove aligns with a T-bar on the motor shaft to ensure correct positioning and fix the fan blade into

place by hand tightening the blade cap anticlockwise gently onto the end of the motor shaft.

V 01/21

Fan assembly components:

1. Front grill

2. Grill ring

3. Rear grill

4. Blade cap

5. Blade

6. Plastic mounting nut

FAN ASSEMBLY INSTRUCTIONS